22VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
SCAN FROM THE ONETOUCH BUTTON PANEL
Scanning from the button panel on your computer’s screen works just like pressing a button on the scanner. The scanner scans the item, then sends the image to the Destination Application indicated by the button’s icon. This method of scanning is especially helpful if the scanner is not located close to your computer.
OneTouch Icon.
To scan from the button panel on the screen:
1.Place an item face down on the glass. Align the bottom of the item with the scanner’s reference marks.
2.Close the document cover, and click the OneTouch icon on the
The button panel opens on the screen. The five buttons on the panel correspond to the same five buttons on the scanner.
3. Click a button on the panel.
The scanner starts scanning the item. When the scan is complete, the scanned image opens in the Destination Application indicated by the button’s icon just as if you had scanned using a scanner button. For example, if you click the Scan button, the scanned image opens in the PaperPort program.
Note: To scan from the Button Panel, the OneTouch Properties window must be closed. Click the window’s close box, or click the Cancel or OK button on the window. See the next section, “Scan from the OneTouch Button Panel.”
