Visioneer OneTouch 7400 manual Setting UP Your Scanner to Work with Paperport

102VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE

SETTING UP YOUR SCANNER TO WORK WITH

PAPERPORT

When you open the PaperPort software the first time, you will be looking at the PaperPort desktop. This initial view has a tree of folders down the left side of the desktop. Click on the Scan button on the toolbar to open the Scan pane on the left side of the screen.

If there is no scanner listed in the top of the Scan pane, or the if the scan button at the bottom of the scan pane does not activate, then PaperPort needs to have the scanner added to the scanner database using the PaperPort Scanner Setup Wizard.

Note: Setting up your scanner is a one-time-only process for each scanner option. Therefore, you may have to set up your scanner once each for TWAIN: Visioneer 7400 and WIA: Visioneer 7400. The setup process, described below, is the same for each option. You will not have to set up the scanner again for an option unless you uninstall the scanner and PaperPort software, then re-install them.