ELECTRIC COMBI OVEN - REMOVAL AND REPLACEMENT OF PARTS
DOOR LAMP |
| OVEN DOOR HINGES |
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AT THE MAIN CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT BOX INDICATING THE CIRCUIT IS BEING SERVICED.
1.Remove the screws holding the cover and gasket.
2.Pull the lamp and socket assembly out from the door.
3.Hold the lamp assembly and grasp the bulb using a cloth.
NOTE: Do not touch the Halogen lamp with bare hands. If lamp is exposed to oil from the skin, the life will be reduced. Ensure lamp is free from oil and dirt before replacing.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AT THE MAIN CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT BOX INDICATING THE CIRCUIT IS BEING SERVICED.
1.Remove and disassemble the door as outlined under “OVEN DOOR”.
2.Remove the light lead wire from the hinge.
NOTE: Strip 3 inches of the shielding away from the wires at the terminal end to allow the terminals to be fed through the hinge one at a time.
3.Remove the cotter pins from the shaft and remove the shaft from the hinges.
4.Pull up on light bulb to remove it from socket.
5.Reverse procedure to install.
4.Reverse procedure to install.
Page 19 of 68
