Wayne-Dalton 341458 Operator Bracket, Installation, NOTE: If installing a trolley type, Properly

11	Operator Bracket
Tools Needed:	NOTE: If installing a trolley type
Power Drill	operator, complete this step. If not, skip
	this step and continue with Step 12.
7/16” Socket
Driver	IMPORTANT: WHEN CONNECTING A
	TROLLEY TYPE GARAGE DOOR OPENER
	TO THIS DOOR, A Wayne-Dalton
	OPENER / TROLLEY BRACKET MUST
	BE SECURELY ATTACHED TO THE TOP

Side view of u-bar on top

section

Top section

U-bar

1/4” - 20 X 7/8”

Self-DRILLING screws

SECTION OF THE DOOR, ALONG WITH

ANY U-BARS PROVIDED WITH THE

DOOR. THE INSTALLATION OF THE

OPENER MUST BE ACCORDING TO

MANUFACTURER’S INSTRUCTIONS AND

FORCE SETTINGS MUST BE ADJUSTED

PROPERLY.

Remove, but retain (4 - 6) 1/4” - 20 x

7/8” self-drilling screws from the center

of the u-bar, allowing the operator

bracket to slide between the top section

and the u-bar.

NOTE: For retro fit applications, the

operator bracket must be aligned with

an existing operator

Locate the center of the top section and

slide operator bracket under u-bar till

the operator bracket is seated against

the u-bar flange. Attach the operator

bracket using (6) 1/4” - 20 x 5/8”

self-drilling screws (as shown). Finish

re-attaching the u-bar using the self-

tapping screws removed previously.

Top section

Operator bracket

U-bar

Top section

Operator

bracket

U-bar

(6) 1/4” - 20 X 5/8”

Operator bracket in	self-drilling
	screws
place under u-bar

INSTALLATION

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local 17 yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com