Wayne-Dalton 341458 installation instructions Top Section

12	Top Section
Tools Needed:	Place the top section in the opening and
Hammer	vertically align with lower sections. Align
	vertical marks in the upper alignment
	sticker, with the lower alignment sticker
	on right hand side on the back of door.
	Temporarily secure the top section by
	driving a nail in the header near the
	center of the door and bending it over
	the top section.
	Now, flip up hinge leafs, hold them tight
	against section and fasten center hinges
	first and end hinges last. (Refer to Step
	9).
	When installing a door with a
	TorqueMaster® counterbalance system,
	vertical track alignment is critical.
	Position flagangle between 1-11/16”
	(43 mm) to 1-3/4” (44 mm) from the
	edge of the door. Flagangles must be
	parallel to the door sections. Now,
	complete the vertical track installation
	by securing the center jamb bracket and
	tightening the other lag screws.
	Repeat for other side.
	IMPORTANT: The dimension between
	the flagangles must be door-
	width plus 3-3/8” (86 mm) to 3-1/2”
	(89 mm) for smooth, safe door
	operation.
	For quick install track:
	Complete the vertical track installation
	by securing the center jamb bracket(s)
	and tightening the other lag screws.
	Repeat for opposite side.
	For fully adjustable track:
	Complete the vertical track installation
	by securing the center jamb bracket(s)
	and tightening the other lag screws.
	Push the vertical track against the
	rollers so that the rollers are touching
	the deepest part of the curved side of
	the track (see illustration); tighten all the
	track bolts and nuts. Repeat for opposite
	side.

NAIL	Door width
	+3-3/8” to 3-1/2”

Alignment stickers

Right end hinge side

1-11/16” TO 1-3/4”

FLAGANGLE

Top

SECTION

Vertical track

ROLLER

ROLLER Against

VERTICAL TRACK

Fully adjustable

18Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local

yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com