Door Section Identification

 

 

Tools Needed:

NOTE: This provides an alternative

 

method for identifying your door

 

sections/stacking position.

 

Hinges are always pre-attached at

 

the top of each section (except top

 

section) and the hinges are stamped for

 

identification, #1, #2, and #3. See view

 

below. The stamp identifies the stacking

 

sequence of the section. The sequence

 

is always determined by #1 being the

 

bottom section to #3 being the highest

 

lock/intermediate section. See views to

 

the right. If the stamp on the end hinge

 

is illegible, refer to the section side view

 

illustration to the right.

 

The section side view illustration shows

 

the end hinge profile of all the sections,

 

and can also be used in conjunction

 

with identifying each sections.

 

The bottom section can be

 

identified by #1 end hinges, the factory

 

attached bottom astragal, and by the

 

bottom bracket warning labels on each

 

end stile.

 

The lock section can be identified

 

by #2 end hinge.

 

NOTE: On 3 section high doors, the

 

lock section can be identified by

 

#3 end hinge and the section will have

 

a warning label attached to either the

 

right or left hand end stile.

 

The intermediate section can be

 

identified by #3 end hinges. The section

 

will have a warning label attached to

 

either the right or left hand end stile.

 

The top section can be identified by

 

no pre-installed hinges on the section

 

and the warning label attached in the

Top Section

#3

 

 

Lock Section

 

 

 

 

 

 

Warning label

#1

Bottom Section

Astragal

Bottom Bracket

warning Labels

 

3 SECTION 7’0” high shown above

Top Section

#3

Warning label

Intermediate Section

#2

Lock Section

#1

Bottom Bracket

warning Labels

Astragal Bottom Section

4 SECTION 8’0” high shown above

1 3/8”

1 1/8”

7/8”

center of the section.

Top

int.

#3 end

#2 end

#1 end

hinge

hinge

hinge

lock

Bottom

 

 

 

BOTTOM

 

 

BRACKET

 

 

Astragal

Typical hinge stamping location

SECTION side view shown above

4Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local

yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Page 4
Image 4
Wayne-Dalton 341458 installation instructions Door Section Identification