Wayne-Dalton 341458 installation instructions Package Contents

Package Contents	NOTE: Depending on the door model, some parts listed will not be supplied if not
	necessary. Rear supports may or may not be included with your door.

9800 SERIES

TorqueMaster Plus - Single and Double Spring

MANUAL	DOOR Sections (as required)
	(1) TorqueMaster® Spring tube
	(2) Horizontal Tracks RH/LH

(2) Fully Adjustable RH/LH	(2) Quick Install RH/LH	SCREW EYE AND	Right and left cable	Right & left
Flagangle (as required)	Flagangle (as required)	Pull rope	drum assemblies	Drum Wraps
		(If included)

(2) Horizontal Angles	(1) operator bracket	Weather seals & nails	Door stop & nails
				(2) Vertical
(22”, 80” or 94”)		(If included)	(If included)
(As required)				Tracks RH/LH

Rollers	(1) Center Bracket	(2) Top Bracket Bases (2) Top Bracket Slides Q.I. Jamb Brackets	f.a. Jamb Brackets
(As required)	Assembly	(As Required)	(As Required)

1/4” - 20 x 7/8” Self-Drilling	1/4” - 20 x 5/8” Self-Drilling	Right & left	(1) Loose Winding Shaft 1/4” - 14 x 5/8” Self-Tapping
Screws (as required)	Screws (as required)	End Brackets	(SINGLE SPRING only)	Screws (as required)

(4) 1/4” - 20 x 5/8” 1/4” - 20 Flanged Hex		Stud plates		(2) 3/8” - 16 x 3/4”		(2) 3/8” - 16 Hex		1/4” - 20 x 9/16” Large
Carriage Bolts	Nuts (as required)	(As required)		Truss Head Bolts		Nuts		head Ribbed Track BOLTS
								(As required)
(1) 5/16” x 1-1/4”	(1) COTTER PIN		(2) 5/16” - 18 x 3/4”		(2) 5/16” - 18		5/16” x 1 5/8” Hex Head Lag Screws
Clevis PIN			carriage Bolts		Hex Nuts			(as required)

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local 3 yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com