Wayne-Dalton 341458 installation instructions Trolley Operator, Immediate adjustments or repairs

	Trolley Operator
Tools Needed:	Align hole in the appropriate arm with
	holes in operator bracket tabs. Insert
None	5/16” x 1-1/4” clevis pin, making sure
	hole in clevis pin is outside of second
	tab of operator bracket. Insert hairpin
	cotter into clevis pin hole and spread
	hairpin cotter to ensure it will secure
	assembly. Operator must be tested at
	time of installation and monthly there
	after to ensure that door reverses on
	contact with 2” x 4” board laid flat under
	the door. Failure to pass this test requires
	immediate adjustments or repairs.

WARNING

FAILURE TO MAKE ADJUSTMENTS

OR REPAIRS, IF NECESSARY, CAN

RESULT IN SEVERE OR FATAL

INJURY.

If your operator is equipped with a photoelectric eye system, then this must be tested at the same time to ensure that door does not close and a closing door opens, if photoelectric eye system is obstructed. Failure to pass this test requires immediate adjustments or repairs.

WARNING

FAILURE TO MAKE ADJUSTMENTS

OR REPAIRS, IF NECESSARY, CAN

RESULT IN SEVERE OR FATAL

INJURY.

1.Install operator rail 1/2” to 1”

(13 mm - 38 mm) above high arc of top section of the door.

2.Mount operator to ceiling so that 1” to 1-1/2” (25 - 38 mm) clearance is maintained between trolley rail and top section when door is fully open (trolley rail will slope down towards rear).

3.Attach door arm to operator bracket installed in Step 9.

4.Attach operator rail to suitable mounting surface, 2” x 6” lumber minimum.

5.Attach operator to ceiling using perforated angle.

IMPORTANT! Perforated Angle must be securely attached to sound framing member(s).

Operator
Bracket		Hairpin
	Operator
tabs	Bracket	Cotter

5/16” x 1-1/4”	Door
Clevis pin
	Arm

Hairpin Cotter	SUITABLE
(Outside of operator	MOUNTING
bracket tab)	SURFACE (2 X 6)
	LUMBER MIN.

HEADER

Operator

bracket tabs

Door arm	OPERATOR
	RAIL

DOOR ARM TO OPERATOR

BRACKET

Top view

Perforated

OPERATOR angle rail

OPERATOR

FRAMING

MEMBERS

PERFORATED ANGLE

34Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local

yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com