Xerox 721P85600 manual System user interface keyboard display, Keyboard display

LPS OVERVIEW

System user interface (keyboard display)

The system user interface consists of a keyboard and display. Figure 1-3 shows the keyboard display.

Figure 1-3.Keyboard display

1/4-inch cartridge tape drive The 1/4-inch cartridge tape drive, also called the QIC, is located in the front panel of the system controller. It is used for system generation (sysgen), disk save and restore (DSR), and file loading/ backup for online systems. The 1/4-inch cartridge tape drive is not an input source for print jobs.

System disk One 1.2 GB unformatted system disk is provided with the Xerox DocuPrint 96/DocuPrint 96MX system controller as a standard feature. The system disk is located inside the system controller and stores the LPS operating system software, fonts, forms, and general user files.

Operator control panel The system controller is powered on or off, booted, and switched between local and remote operation using the buttons on this panel, as shown in figure 1-4.

Figure 1-4.Operator control panel

1Power On switch

2Power Off Switch

3Power On indicator

4Boot switch

5Remote switch and indicator

6Local switch and indicator

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE 1-3