Xerox 721P85600 manual Hz printer outlet voltages, Rms

PREINSTALLATION

50 Hz system controller and peripheral cabinet power cord configurations

Figure 3-11 shows the 50 Hz system controller power cord configuration.

Figure 3-11.System controller and peripheral cabinet power cord 50 Hz installation 200/230 VAC, single phase, 15A

Note: The 50 Hz plug and receptacle specifications vary according to local codes.

60 Hz printer outlet voltages

Note: All power outlets must have a dedicated circuit for each system equipment piece. Ensure that each power cord has a separate circuit.

Refer to table 3-12 for the 60Hz voltage requirements at the power outlet.

Table 3-12.Printer (50 Hz) voltage requirements at power outlet

Service outlet
configuration	Measurement	Nominal	Range
4 Wire	Line 1 to Neutral	120 V RMS	107-127 V RMS
4 Wire	Line 2 to Neutral	120 V RMS	107-127 V RMS
4 Wire	Neutral to	0 V RMS	0-10 V RMS
	Ground
4 Wire	Line 1 to Line 2	208 V RMS	182-220 V RMS
	Line 1 to Line 2	240 V RMS	210-254 V RMS

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE 3-21