LPS OPTIONS
Input enablement device
Adding feeders to your DocuPrint 96/DocuPrint 96MX LPS is made possible by the input enablement device option. Located on the right side of the feeder/stacker, it allows your DocuPrint 96/DocuPrint 96MX LPS to support and interface directly with feeders. Figure
Printer Configurations
The DocuPrint 96/DocuPrint 96MX LPS is available in the following configurations:
1.Printer + Inverter Feeder/Stacker
2.Printer + Inverter Feeder/Stacker + Bypass Transport
3.Printer + Inverter Feeder Stacker + Feeder Stacker
4.Printer + Inverter Feeder Stacker + Feeder Stacker + Bypass Transport
Each of these configurations can have the Input enablement device option.
Refer to the “Printer options” section earlier in this chapter for information about each of the options above.
Figures 2-3 through 2-6 illustrate each of the four printer configurations available.
Figure 2-3. Printer + Inverter Feeder/Stacker
Figure 2-4. Printer + Inverter Feeder/Stacker + Bypass
Transport
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE |
