LPS OPTIONS
Printer options
The DocuPrint 96/DocuPrint 96MX LPS is available with the following options:
•
•
•
Feeder/Stacker
Bypass Transport
Input Enablement device
Feeder stacker
The DocuPrint 96/DocuPrint 96MX LPS has an Inverter Feeder
Stacker, and up to one optional feeder stacker.
Refer to the section “Printer components” in the “LPS overview” chapter for information on the feeder stacker.
Bypass transport
The ability to add finishers to your DocuPrint 96/DocuPrint 96MX LPS is made possible by the Bypass Transport option. Finishers increase your production capabilities by providing a wide range of finishing choices, such as stitching, shrink wrapping, and so on.
Connected to the feeder/stacker, the bypass transport allows finishers to interface directly with your DocuPrint 96/DocuPrint 96MX LPS. The bypass transport meets the Xerox Document Feeding and Finishing Architecture (DFA) Level 1 specifications.
Figure 2-2 shows the DocuPrint 96/DocuPrint 96MX LPS with the optional bypass transport and the paper output and input locations.
Figure 2-2. DocuPrint 96/DocuPrint 96MX LPS with optional bypass transport and input enablement device
1Bypass transport paper output location
2Input enablement device paper input location
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE |
