Xerox 721P85600 manual Customer responsibilities

INTRODUCTION

Customer responsibilities

Your responsibilities prior to, during, and after installation of the LPS are to:

•

•

Identify the primary interface with Xerox.

Select and prepare the site for LPS installation (including adequate power and air conditioning).

•

•

•

•

•

Obtain the necessary interfaces, cables, transceivers, phone lines, and so forth, if connecting to other equipment.

Plan for and schedule installation activities.

Monitor progress for a successful installation.

Order and maintain supplies.

Work with your Xerox or Xerox Limited representatives to determine requirements for initial applications.

•Work with representatives from the company you have purchased any additional equipment from (such as finishers).

Note: Be sure that your system specialists are familiar with the operating system software specific to your LPS; operating system software is not the same for all laser printing systems. If your system specialists are familiar with one of these operating systems and you are converting to or adding another, they should learn the differences.

•Select operators and system specialists, and schedule their training.

Note: In a mixed environment where there are a variety of printing systems, discuss print quality differences with your Xerox or Xerox Limited service representative.

Training Operator training is conducted at your site shortly after the LPS has been installed. Operators receive hands-on instruction on printing jobs, maintenance, and problem solving.

Xerox offers a number of workshops and self-paced courses that teach advanced skills, including Advanced Customer Training (ACT). Contact your sales representative for additional information about these courses, or call Xerox Customer Education at 1-800-445-5554. (Refer to the “Documentation and training” section of the, “Preinstallation” chapter.)

xiv XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE