Xerox 721P85600 manual Xerox DocuPrint 96/DocuPrint 96MX printer components

LPS OVERVIEW

Xerox DocuPrint 96/DocuPrint 96MX printer components

The printer is the part of the Xerox DocuPrint 96/DocuPrint 96MX LPS that processes the electronic data and images received from the system controller and produces the printed report. The parts of the printer are shown in figure 1-5.

Figure 1-5.Xerox DocuPrint 96/DocuPrint 96MX printer

1Processor feeder trays

2Inverter feeder/stacker module

3Purge tray

4Attention light

5Sample tray

6Printer control console

Processor feeder trays Two processor feeder trays are located in the main part of the printer:

•

•

The main tray (tray 1) holds up to 1100 sheets of 20 pound/75 gsm (grams per square meter) paper.

The auxiliary tray (tray 2) holds up to 600 sheets of 20 pound/75 gsm paper.

Inverter The inverter is part of the inverter feeder/stacker module. It allows for proper collation of the print job. It also directs printed output to the sample tray, when required.

High-capacity feeder There is a high-capacity feeder (HCF) tray located in the bottom half of the feeder/stacker module.

The HCF tray can hold up to 2600 sheets of 20 pound/75 gsm paper.

High-capacity stacker There is a high-capacity stacker (HCS) bin located in the top half of the feeder/stacker module.

The HCS bin can hold up to 2500 sheets of 20 pound/75 gsm paper. Paper can be stacked directly onto the HCS pallet or into a specially- designed container. Stacking capacity is approximately 100 to 150 sheets less when stacking into a container.

1-4 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE