Xerox 721P85600 manual Interface requirements, Finishing and feeding equipment, Channel-attached

PREINSTALLATION

Finishing and feeding equipment

It is important to note that while the Bypass Transport and Input Enablement options provide you with an interface between your DocuPrint 96/DocuPrint 96MX LPS and your finishing and feeding accessories, they require their own AC and DC power sources. The power must be independent of your DocuPrint 96/DocuPrint 96MX LPS.

Consult your Xerox or Xerox Limited sales representative, as well as the sales representative of the company from which you purchased your finishing and feeding equipment, for specific electrical and space requirements.

Interface requirements

This section describes the System interface requirements for

Channel-attached or Third Party connection for the printer.

Channel-attached

For an online configuration with an IBM host system, the following cables must be available:

•

•

•

Bus and tag cables (bus in, bus out, tag in, tag out)

Emergency power off (EPO) cable (optional)

Terminators (if necessary, due to location on channel).

For your convenience, it is possible to order the Bus and Tag cables for the printer through Xerox Corporation on a purchase-only basis. Contact your Xerox or Xerox Limited sales representative for current pricing and order information.

Third party connections

Xerox supports a number of third party connections. For more information, contact your Xerox or Xerox Limited sales representative or call the Xerox Connection between 7 a.m. and 4 p.m. Pacific time using the following telephone number:

1-800-451-9312(continental U.S.)

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE 3-23