Xerox 721P85600 manual Face-to-face shared service area space

PREINSTALLATION

Figure 3-8 shows the minimum service space required between two DocuPrint 96/DocuPrint 96MX printers positioned face-to-face. The printers should be separated by at least 74 inches/1880 mm. This allows enough space for the front panels of one printer to be opened, without obstructing the 24 inch/610 mm operator area of the other printer.

Figure 3-8.Face-to-face shared service area space

When determining your space requirements and planning for shared space between your LPS, it is important to consider all the components you plan to have installed. If you have an optional bypass transport or input enablement device on your DocuPrint 96/ DocuPrint 96MX LPS, you need to consider the size and configuration of the finishers and feeders you purchase. A finisher can add considerable length to your LPS and possibly consume space in front of your LPS. Your feeder may require a large amount of space behind your LPS.

The 36-inch/914-mm clearance space around each component must be observed for your feeders and finishers, therefore, must be considered when planning configuration of your systems. To ensure all the space requirements are met, it is important to work with your Xerox or Xerox Limited representatives, as well as the representatives of the company from which you have purchased your finishers and feeders.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE 3-9