WARNING: The fuser can be very hot. To avoid personal injury, wait at least 20 minutes before performing the next step to allow the fuser to cool. Do not touch any component other than those indicated in the following procedure.
1
2
4 | Press down on the Front and Rear Release |
| |
| buttons on the top of the fuser assembly, as |
| illustrated in Figure 44, to unlatch the Cleaning |
| Web (area E). The web opens to the right of the |
| Paper Path Module. |
Figure 43: Allow the fuser to cool
E
Figure 44: Unlatching the Cleaning Web
3
4
5 | Gently push down on the Cleaning Web (E) and |
| |
| pull it toward the right to remove the web from the |
| copier/printer, as illustrated in Figure 45. |
6 | Place the Cleaning Web in a bag and dispose of |
| |
| the web according to local regulations. |
Figure 45: Removing the Cleaning Web
5
6
7
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE | MAINTENANCE |