Xerox a2 manual 1 2 3, 4 5 6 7, Rotating and securing the Cartridge

1

2

3

7	Align the arrow on the cartridge with the raised
	arrow at the top of the opening, and slide the
	cartridge into the copier/printer, as illustrated in
	Figure 12.

Figure 12: Aligning the Cartridge arrow and sliding the Cartridge into the copier/printer

8	Rotate the cartridge clockwise until the dot on the
	cartridge is aligned with the dot on the copier/
	printer and the arrows on the cartridge are
	horizontal, as illustrated in Figure 13

4

5

6

7

9	Close the Front Door of the copier/printer.
10	Remove the sheets of paper on the floor under the
	Dry Ink Cartridge, and dispose of the sheets
	according to local regulations.
	CAUTION: Do not use warm or hot water, or
	cleaning solvents, to remove dry ink from your
	skin or clothing. This will set the dry ink and make
	it difficult to remove. If any dry ink gets on your
	skin or clothing, use a brush to remove the dry ink,
	blow it off, or wash it off with cold water and mild
	soap.
	CAUTION: If more than one Dry Ink Cartridge
	needs to be replaced at the same time, be careful
	to place the new cartridges in their correct color
	locations.

Figure 13: Rotating and securing

the Cartridge

MAINTENANCE 4–8 DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE