Replacing the Fuser Oil Cartridge
| When a message is displayed to replace the |
| 1 |
|
|
| |
| Fuser Oil, follow the instructions provided on this |
|
|
| page in addition to those on the labels |
|
|
| surrounding the Fuser Oil area (Figure 34) and |
|
|
| affixed to the copier/printer. |
|
|
| WARNING: The fuser can be very hot. To avoid |
|
|
| personal injury, do not touch any component other | Figure 34: Check the Fuser Oil message | 2 |
| than those indicated in the following procedure. | ||
| CAUTION: Fuser oil can be slippery. If any fuser |
|
|
| oil is spilled on the floor, thoroughly clean the |
|
|
| area. |
|
|
| WARNING: Do not place the fuser oil cartridge on |
| 3 |
| the copier/printer. If any fuser oil is spilled on the |
|
|
| copier/printer, thoroughly clean it. |
|
|
| WARNING: Fuser oil may cause irritation to your |
|
|
| eyes. Thoroughly wash your hands with soap and |
|
|
| water after handling the fuser oil cartridge. |
|
|
|
|
|
|
|
|
| 4 |
|
|
| |
1 | Open the Front Door of the copier/printer. |
|
|
|
| ||
|
|
| |
2 | Place a few sheets of paper on the floor to catch |
|
|
|
|
| |
3 | any fuser oil that may spill. |
|
|
Rotate the green handle clockwise, to the down |
| 5 | |
|
|
|
position.
6
7
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE | MAINTENANCE |