Yamaha 01X - page 105

01X Owner’s Manual

Remote Function List

105

Before UsingBasics SectionAppendix Getting StartedReference

[F8] ([SAVE] ﬂashes) This cancels the Save operation, when the ﬁnal conﬁrmation for Save appears ([SAVE]

ﬂashes). —

[SHIFT]+[F1] Brings the Track View window to the front of the computer screen. (This operation

applies to the current song.) —

[SHIFT]+[F2] Displays the Mixer window (Audio Mixer/Multi Part Editor) or brings it to the front of

the computer screen. —

[SHIFT]+[F3] Displays the List window or brings it to the front of the computer screen. —

[SHIFT]+[F4] Closes the current window. —

[SHIFT]+[F5] Displays the Piano Roll window or brings it to the front of the computer screen. —

[SHIFT]+[F6] No function —

[SHIFT]+[F7] Starts the TWE (Wave Editor). —

[SHIFT]+[F8] Alternately hides/shows the Transport window (Transport Bar/Location Bar/Record). —

[UNDO] Executes the Undo operation. —

[SHIFT]+[UNDO] Executes the Redo operation. —

[SAVE] When the lamp lights, press this so that the lamp ﬂashes. Press this again to execute the

Save operation (lamp turns off). Press [F8] to cancel it. lights/ﬂashes

[MARKER]+[WRITE] Enters/clears a Marker at the current song position. —

[r]Press brieﬂy to move back one measure at a time, or hold to continuously rewind. —

[MARKER]+[r]Moves the song position to the previous Marker. —

[f]Press brieﬂy to move forward one measure at a time, or hold to continuously fast-for-

ward. —

[MARKER]+[f]Moves the song position to the next Marker. —

[■] Press to stop recording or playback. Pressing this when playback is stopped goes to the

top of the song. —

[>]Press to start playback from the current point. lights

FOOT SWITCH 1 Playback/Stop —

[●] or FOOT SWITCH 2 Press this to enter/exit from the Recording Standby. The [>] (Play) and [●] (Rec) lamp

are turned on during recording. lights

[ZOOM] Turns Zoom on and off. lights

Cursor [ ] ([ZOOM] goes out) Moves the cursor (indicating the current track) up. —

Cursor [ ] ([ZOOM] goes out) Moves the cursor (indicating the current track) down. —

Cursor [ ] ([ZOOM] goes out) Selects the previous block. —

Cursor [ ] ([ZOOM] goes out) Selects the next block. —

Cursor [ ///] ([ZOOM] lights) Zooms in/out in the active Track View and Piano Roll Window. —

Dial Moves the song position. (See ��SCRUB” below.) —

[SCRUB]

Determines how the Scrub function is applied when using the dial. When this is set to on,

Scrub moves according to the Grid position in the Track View window. When set to off, it

moves in measures.

lights/goes out

PAN mode [PAN] lights

Knobs 1 – 8 (turning) Edits the Pan (on page 1). —

Knobs 1 – 8 (turning) Edits the Input level (on page 2). —

[SHIFT]+Knobs 1 – 8 (pressing) Resets the edited parameter to the default value (CENTER/0.00). —

AUX SEND mode [SEND] (Not available when the AUX/BUS window is active.) lights

Knobs 1 – 8 (turning) Edits the AUX Send Level. —

[SHIFT]+Knobs 1 – 8 (pressing) Resets the edited parameter to the default value (-∞). —

EFF SEND mode [EFFECT] (Not available when the AUX/BUS window is active.) lights

Knobs 1 – 8 Edits the Effect Send Level. —

[SHIFT]+Knobs 1 – 8 Resets the edited parameter to the default value (-∞). —

No function

[REC RDY] [LOOP] [EDIT] [FLIP]

Button Function LED

Notes

(page 114)