108
Remote Function List
01X Owner’s Manual
Before Using Basics Section AppendixGetting Started Reference
Cubase/NUENDO: On the 01X, set Remote Select (page 87) in the Utility mode to “CUBASE.”
Knobs 1 – 8 (pressing)
(Parameter page) Reset the parameter value to the default. (Some parameters cannot be reset.)
DISPLAY [ / ]
Cursor [ / ]
(Parameter page)
Changes the page. (Page is displayed at the right of the LCD.)
[SHIFT]+[PLUG-IN] Return to the PLUG-IN mode from PLUG-IN parameter pages.
INSTRUMENT mode [SHIFT]+[INST] (Multi Channel View)
[SHIFT]+[INST] [SHIFT]+[INST] (Track Parameter View) lights *28
Knobs 1 – 8
(turning pressing)
Turn the knob to select the desired instrument for insertion (indication flashes), then
press the knob to actually enter the selected setting.
Knobs 1 – 8 (pressing)
(Knob to which the Instrument is assigned) Calls up the parameter page and displays the Editor window on Logic.
Knobs 1 – 8 (turning)
(Parameter page) For editing parameters.
Knobs 1 – 8 (pressing)
(Parameter page) Reset the parameter value to the default. (Some parameters cannot be reset.)
DISPLAY [ / ]
Cursor [ / ]
(Parameter page)
Changes the page. (Page is displayed at the right of the LCD.)
[SHIFT]+[INST] IReturn to the INSTRUMENT mode.
No function
[WRITE]
Button Function LED
Notes
(page 114)
In all modes:
[NAME/VALUE] Changes the indication of the parameter name and its value.
DISPLAY [ / ] Calls up the next/previous page.
[SHIFT]+DISPLAY [ ] Calls up the first page.
[SHIFT]+DISPLAY [ ] Calls up the last page.
[SHIFT]+[REMOTE] Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-
cel the mode. flashes *5
[SEL] (in normal status) Selects a channel. lights/goes out *2
[SEL] ([SEL] flashes) Fader touch-out (page 15) flashes
goes out
[SEL] ([AUTO EDIT] lights) Fader touch-in (page 15) flashes
[ON] (in normal status) Turns each channel off or on (mutes/unmutes the signal) lights/goes out *2
[SHIFT]+[ON] (in normal status) Turns all the channels on. lights *2, 12, 13
[ON] ([SOLO] lights) Sets Solo for each channel to on or off. lights/goes out *2
[SHIFT]+[ON] ([SOLO] lights) Sets Solo for all channels to off, lights/goes out *2, 12
[ON] ([REC RDY] lights) Sets the REC RDY of each channel to on or off. lights/goes out *2
[ON] ([AUTO R/W] lights) Switches the automation status of the selected channel (only that channel) in order: Off,
Read and Read + Write. lights/goes out *14
[SHIFT]+[ON] ([AUTO R/W] lights) Switches the automation status of all channels in order: Off, Read, Read + Write, Write
(or Off, Write, Write + Read, Read). lights/goes out *2, 14
[AUTO EDIT] Changes the function of the [SEL] button to the touch-in function. This button flashes
during automation touch-in. lights
[SOLO] Changes the function of the [ON] button to the Solo function. lights
[REC RDY] Changes the function of the [ON] button to the REC RDY function. lights
[AUTO R/W] Changes the function of the [ON] button to the AUTO R/W function. lights
BANK [</>]Scrolls through the track indication every eight channels.
[SHIFT]+BANK [</>]Scrolls through the track indication channel-by-channel.
[FLIP] Exchanges the functions between the Channel Knobs and the Faders. lights
[EDIT] Opens the Edit window for the currently selected block (AUDIO/MIDI).
[LOOP] Turns Loop on or off. lights/goes out
[F1] – [F8] [F1] – [F8] as defined in Cubase/Nuendo.
[SHIFT]+[F1] Brings the Track View window to the front of the computer screen.
Button Function LED
Notes
(page 114)