Yamaha 01X Entering Characters (Title Edit)

01X Owner’s Manual
Basic Operations
41
Before UsingBasics SectionAppendix Getting StartedReference
●Selected Channel mode
To select a channel on the 01X, press the corresponding
[SEL] button. The channel is selected and the [SEL] button
lamp lights up.
●Stereo Input Channel
For stereo input channels, you can set the left and right
panpots individually. Repearedly pressing the STEREO
[SEL] button toggles between the left and right channels.
• L- : indicates the left channel pan settings of the ste-
reo input channel.
• R- : indicates the right channel pan settings of the
stereo input channel.
Entering Characters (Title Edit)
You can freely name the stored Library. The following data
types can be named.
• Scene Library (page 85)
• Input Patch Library (page 89)
• Output Patch Library (page 91)
• EQ Library (page 99)
• Dynamics Library (page 100)
•Effect Library (page 103)
• Channel Library (page 103)
The instructions below apply to naming of any of the
Libraries.
• Librar y titles are named after the Libraries themselves have been
stored.
•This operation only saves the data of the Library name. Other setting
data is not saved until you actually store the Library (pages 50, 54).
qTurn any of the channel knobs [1]- [4] to select the
desired Library number for naming.
wPress any of the channel knobs [1]- [4] to edit the first
position of the name. The first character of the name
flashes.
•To cancel the operation, press channel knob [7] (EXIT).
eTurn any of the channel knobs [2] - [4] to move the cur-
sor to the desired position.
•Keep in mind that turning channel knob [1] exits from the title edit
operation.
PAN
L-L63 L-L63
PAN
R-R63 L-L63
SCENE LIBRARY SCENE No. [ 05]
05 [Initial Data ] CHAR INSERT EXIT/OK