20
Controls and Connectors
01X Owner’s Manual
Before Using Basics Section AppendixGetting Started Reference
These buttons are used primarily for controlling song play-
back/recording on your DAW software. They also let you
control the software no matter which mode is selected,
Remote or Internal. The functions are the same as the
transport buttons in the software (page 104). On the SQ01
for example, the buttons function as follows.
#7 [r] (Rewind) button
Causes the song location to rewind.
#8 [f] (Forward) button
Causes the song location to fast forward.
#9 [] (Stop) button
Stops playback or recording of the song. By connecting an
optional Foot Switch (page 23), you can also control this
by foot.
$0 [>] (Play) button
Starts song playback. If the Record button is On, record-
ing will begin. By connecting an optional Foot Switch
(page 23), you can also control this by foot.
$1 [] (Record) button
Enables recording standby. Pressing this again cancels
recording standby.
$2 [MARKER] button
To enter a marker at a selected location in the song, turn
this button on and press the [WRITE] button.
•Move to the next marker location by using
[MARKER] and the [f] (Forward) button.
•Move to the previous marker location by using
[MARKER] and the [r] (Rewind) button.
•To delete a marker, move to the location of the
marker and press the [MARKER] and [WRITE] but-
ton again.
$3 [ZOOM] button
When the 01X is set to Remote mode, this button turns
Zoom on and off.
$4 Cursor [ / / / ] (Left/Right/Up/Down)
buttons
For moving the cursor and navigating in the DAW display.
$5 Dial (Rotary Encoder)
Moves the song position (pointer/line).
$6 [SCRUB] button
When this is set to on, the dial can be used for the Scrub
function.
Transport Buttons
#7
$5
$6
$2
$3
$4
#8 #9 $0 $1