Yamaha 01X - page 99

01X Owner’s Manual

Function Tree/Function List

Before UsingBasics SectionAppendix Getting StartedReference

■EQ LIBRARY (Common to 4 bands) (Selected Channel only)

(This can be called up by pressing the same EQ button twice in a row. For example: [EQ LOW] → [EQ LOW])

q – r01 – 200

(Library number)

Determines the Library number. Preset EQ numbers (01 – 40; see page 115)

are indicated by asterisks (*) in the display and cannot be changed. No 36

z – v(Title Edit) Determines the title (name) of the EQ Library. No 41

bRECALL For calling up the selected EQ Library. The conﬁrmation prompt can be

turned on/off as desired. (See “Recall Conﬁrmation” on page 95.) Yes 54

nSTORE

EQ settings are stored to internal memory in the EQ Library. Up to 160 set-

tings can be stored. The conﬁrmation prompt can be turned on/off as desired.

(See “Store Conﬁrmation” on page 95.)

•Any and all data in the Store destination will be lost when executing the

Store operation. Make sure to save and archive important data to com-

puter using the Studio Manager program (page 9).

Yes 65

mCLEAR This deletes the selected EQ Library. Yes

PAN [INTERNAL] → ([SELECTED CHANNEL]) → [PAN]

PAN/BALANCE

q – i

(q)L63 – CENTER – R63

Enables adjustment of the pan setting of the signals routed from the Input

Channels to the Stereo Bus. Pressing the [SEL] button of ST IN channels

repeatedly toggles between the left and right channels, for independent opera-

tion. You can also apply the pan setting to a pair of Bus channels. When the

Stereo Out (ST) is selected, it is used to set the balance.

No !1

RECBUS (REC bus assign)

q – i

(e)ON/-- When this is set to on, the corresponding input channel signal is sent to the

Rec Bus. No @1

ST-BUS (Stereo bus assign)

q – i

(r)ON/-- When this is set to on, the corresponding input channel signal is sent to the

Stereo Bus. No @1

PHASE

q – i

(t)NORMAL/REVERS

Switch the corresponding Input Channel phase. NORMAL indicates normal

phase, and REVERS indicates reversed phase. You can set the phase sepa-

rately for ST IN channel L/R or each channel in a channel pair. Pressing the

[SEL] buttons repeatedly toggles between L and R.

No 21 y

ON/OFF (Selected Channel only)

(u) ON/OFF Determines whether the channel is on or off. The channel is muted with the

Off setting. This works in unison with the [ON] button on the panel. No o

LEVEL (Selected Channel only)

(i)

-∞ – +6.0

(BUS/AUX/ST:

-∞ – +0.0)

Enables adjustment of the input level of the Input Channel signal and the out-

put level of the Output Channel. When the channel knob 8 is pressed, the level

is set to nominal (0dB). This works in unison with the channel fader on the

panel.

No !0

Knob Function name/

settings Explanation Prompt

pages

Block

diagram

[PAGE SHIFT] + DISPLAY [ / ]