Yamaha 01X Other control features

82
Recording/Playback/Remote Control
01X Owner’s Manual
Before Using Basics Section AppendixGetting Started Reference
Other control features
Using the Function buttons
The eight Function buttons [F1] - [F8] provide a powerful
and versatile way to customize DAW control and stream-
line your recording, editing and mixing work. Just as with
the Key Commands, these buttons can be assigned to any
desired function, operation or command. Used in conjunc-
tion with the [SHIFT] button, you can program up to thir-
teen different key commands for instant, one-touch control
from the 01X. What’s more, the two FOOT SWITCH
jacks can also be assigned, letting you control two separate
functions with connected footswitches.
●Assigning the Function buttons
1From the Devices menu, select “Device Setup...”
2Select “Mackie Control” from the list.
3In the chart next to the button you wish to assign,
click the Category cell. From the pop-up menu,
select the desired Category.
For details on the available Categories and Com-
mands, refer to the Cubase SX documentation.
4Next, click the Command cell for the button, and
select the desired Command from the pop-up menu.
5Repeat steps 3 and 4 above to program the other
Function buttons and their [SHIFT] combinations.
Also, program the footswitches if desired (User A and
B correspond to FOOT SWITCH jacks A and B,
respectively.)
• The [SHIFT] combinations with [F1], [F2] and [F4] are
reserved for other functions (TRACK, MIXER and CLOSE),
and cannot be programmed.
6Click [Apply] to enter the settings, then click [OK].