Yamaha 01X Digital Performer: On the 01X, set Remote Select (page 87) in the Utility mode to DP.

112

Remote Function List

01X Owner’s Manual

Before Using Basics Section AppendixGetting Started Reference

■Digital Performer: On the 01X, set Remote Select (page 87) in the Utility mode to “DP.”

Button Function LED

Notes

(page 114)

In all modes:

[SHIFT]+[PAN] Calls up the Mode list display. —

[SHIFT]+[NAME/VALUE] Turns the Meter indication on or off. —

[SHIFT]+[REMOTE] Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-

cel the mode. ﬂashes *5

[SEL] (in normal status) Selects a channel. lights/goes out *2

[SHIFT]+[SEL] (in normal status) Selects multiple channels. lights/goes out *2

[SEL] ([SEL] ﬂashes) Fader touch-out (page 15) ﬂashes ➝

goes out

[SEL] ([AUTO EDIT] lights) Fader touch-in (page 15) ﬂashes

[ON] (in normal status) Turns each channel off or on (mutes/unmutes the signal). lights/goes out *2

[ON] ([SOLO] lights) Sets Solo for each channel to on or off. lights/goes out *2

[ON] ([REC RDY] lights) Sets the REC RDY of each channel to on or off. lights/goes out *2

[AUTO EDIT] Changes the function of the [SEL] button to the touch-in function. This button ﬂashes

during automation touch-in. lights

[SOLO] Changes the function of the [ON] button to the Solo function. lights

[REC RDY] Changes the function of the [ON] button to the REC RDY function. lights

[AUTO R/W] (while being pressed)

Indicates the automation condition of the channel in the LCD.

• READ.......Automation = TOUCH

• READ.......Automation = LATCH

lights *38

[AUTO R/W]+[SEL] Switches the automation Read function on/off, and changes automation mode to Touch. lights *36

[GROUP] (while being pressed) Indicates the Group to which the fader is assigned. —

[GROUP] and the currently lit [SEL] Releases the Group assignment. —

[SHIFT]+[GROUP] Assigns the selected channels to a Group. —

[AUDIO]/[INSTRUMENT]/

[MIDI]/[BUS/AUX]/[OTHER] Displays the Mixer window —

BANK [</>]Scrolls through the track indication every eight channels. —

[SHIFT]+BANK [</>]Scrolls through the track indication channel-by-channel. —

[LOOP] Turns Loop on or off. —

[F1] – [F8] No function —

[SHIFT]+[F1] Displays the Track Overview. —

[SHIFT]+[F2] Displays the Mixer window —

[SHIFT]+[F3] Displays the Event List window for the selected channel. — *23

[SHIFT]+[F4] Closes the current window. —

[SHIFT]+[F5] Displays the MIDI Edit window. — *23, 24

[SHIFT]+[F6] Displays the Sequencer Editor window. —

[SHIFT]+[F7] Displays the Soundbites window. —

[SHIFT]+[F8] No function —

[UNDO] Executes the Undo operation. —

[SHIFT]+[UNDO] Executes the Redo operation. —

[SAVE] When the lamp lights, press this so that the lamp ﬂashes. Press this again to execute the

Save operation (lamp turns off).

lights ➝ ﬂashes

➝ goes out

[MARKER] Turns the Marker on or off. —

[SHIFT]+[MARKER] Opens the Marker Option window. —

[r]Press to continuously rewind. Press again to rewind more quickly. When the Marker is

turned on, this operation moves the song position to the previous Marker. —

[SHIFT]+[r]Moves the song position to the top of the song. —

[f]Press to continuously fast-forward. Press again to fast-forward more quickly. When the

Marker is turned on, this operation moves the song position to the next Marker. —

[■]Stops recording or playback. —

[>]Press to start playback. lights

[●]Press this to start song recording. The [>] (Play) and [●] (Rec) lamp are turned on dur-

ing recording. lights

[ZOOM] Switches between Scroll (lamp lights), Zoom (lamp is off), and Nudge (lamp ﬂashes). goes out ➝

lights ➝ ﬂashes

FOOT SWITCH 1 Controls the function set in the Preferences in Digital Performer. —

FOOT SWITCH 2 Controls the function set in the Preferences in Digital Performer. —

[SCRUB] Turns Scrub on and off. When turned on, you can use the dial to move the song position. lights *25