01X Owner’s Manual
Recording/Playback/Remote Control
67
Before UsingBasics SectionAppendix Getting StartedReference
eSelect “Mackie Control” (or “Yamaha 01X”) from the
list and click Add.
rSelect “Mackie Control” from the “Devices” list, then
click on the setup tab.
tSet the MIDI Input and Output ports.
Select the unnumbered mLAN MIDI port; this corre-
sponds to Port 1 for the remote control functions.
yClick OK to finish.
•For details on which mLAN MIDI port numbers are available for
the 01X, see page 95.
•MIDI and audio setup
Since mLAN serves not only as a control surface for
Cubase SX but also as a MIDI and audio interface, you’ll
need to make the appropriate MIDI and audio settings in
Cubase SX.
MIDI setup
qFrom the Devices menu, select “Device Setup...”
wSelect “Default MIDI Ports” from the list.
eClick on the Setup tab (if necessary).
rSet the MIDI Input and Output ports.
Click on the arrow to call up the pop-up menu. If you
wish to use the 01X as a MIDI interface as well, using
the separate MIDI A or B terminal on the rear panel, set
these to mLAN MIDI Port 2 or 3. You can also select a
USB MIDI port here, depending on your computer and
the particular USB device you are using.
•For details on which mLAN MIDI port numbers are available for
the 01X, see page 95.