106
Remote Function List
01X Owner’s Manual
Before Using Basics Section AppendixGetting Started Reference
LOGIC: On the 01X, set Remote Select (page 87) in the Utility mode to “LOGIC.”
Button Function LED
Notes
(page 114)
In all modes:
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SHIFT]+[NAME/VALUE] Changes the meter display mode.
[PAGE SHIFT]+DISPLAY [ / ]
Cursor [ / ]
(Multi Channel View)
(Parameters other than PAN/NSTRUMENT
mode)
Changes the Slot number.
[SHIFT]+[REMOTE] Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-
cel the mode. flashes *5
[SEL] (in normal status) Selects a channel. lights/goes out *1, 2
[SEL] ([SEL] flashes) Fader touch-out (page 15) flashes
goes out
[SEL] ([AUTO EDIT] lights) Fader touch-in (page 15) flashes
[ON] (in normal status) Turns each channel off or on (mutes/unmutes the signal). lights/goes out *1, 2
[SHIFT]+[ON] (in normal status) Turns all the channels on. lights *1, 2, 6, 7
[ON] ([SOLO] lights) Sets Solo for each channel to on or off. lights/goes out *2
[SHIFT]+[ON] ([SOLO] lights) Sets Solo for all channels to off (excepting the master channel). goes out *2
[ON] ([REC RDY] lights) Sets the REC RDY of each channel to on or off. lights/goes out *2
[SHIFT]+[ON] ([REC RDY] lights) Sets REC RDY for all channels to off (excepting the master channel). goes out *2
[ON] ([AUTO R/W] lights) Switches the automation status of the selected channel (only that channel) in order:
Latch, Touch, Read and Off. lights/goes out *2
[SHIFT]+[ON] ([AUTO R/W] lights) Switches the automation status (Read/Off) of all channels. lights/goes out *2, 7, 8
[AUTO EDIT] Changes the function of the [SEL] button to the touch-in function. This button flashes
during automation touch-in. lights
[SOLO] Changes the function of the [ON] button to the Solo function. lights
[REC RDY] Changes the function of the [ON] button to the REC RDY function. lights
[AUTO R/W] Changes the function of the [ON] button to the AUTO R/W function. lights
[AUDIO] Makes the Global View mode active and displays the Audio track with the Multi Channel
view. Pressing this again restores the normal track display. lights *9
[INST] Makes the Global View mode active and displays the Audio Instrument track with the
Multi Channel view. Pressing this again restores the normal track display. lights *9
[MIDI] Makes the Global View mode active and displays the MIDI track with the Multi Channel
view. Pressing this again restores the normal track display. lights *9
[BUS/AUX]
Makes the Global View mode active and displays the AUX object, BUS object, AUDIO
OUTPUT object with the Multi Channel view.
Pressing this alternates among the following displays, in order: Bus Track, Aux Track,
Output Track and Normal Track.
lights *9
[OTHER] Makes the Global View mode active and displays the AUDIO INPUT object with the
Multi Channel view. Pressing this again restores the normal track display. lights *9
BANK [</>]Scrolls through the track indication every eight channels.
[SHIFT]+BANK [</>]Scrolls through the track indication channel-by-channel.
[FLIP] Exchanges the functions between the Channel Knobs and the Faders. lights
[SHIFT]+[FLIP] Assigns the function of the Channel Knob to the Fader. flashes
[EDIT] Turns Nudge on or off. lights/goes out
[SHIFT]+[EDIT] Enters the Nudge Option mode.
[LOOP] Turns Loop on or off. lights/goes out
[SHIFT]+[LOOP] Enters the Cycle Option mode.
[F1] – [F7] Calls up Screen Sets 1 – 7.
[SHIFT]+[F1] Brings the Track View window to the front of the computer screen.
[SHIFT]+[F2] Displays the Mixer window
[SHIFT]+[F3] Displays the List window.
[SHIFT]+[F4] Closes the current window.
[SHIFT]+[F5] Displays the Piano Roll window.
[SHIFT]+[F6] Displays the Score window
[SHIFT]+[F7] Displays the Audio window
[SHIFT]+[F8] Shows the Transport Bar.
[UNDO] Executes the Undo operation.
[SHIFT]+[UNDO] Executes the Redo operation.