TRACK EDITING
■Editing during playback
1. Select and confirm “Part Erase” in step 2 of “Editing during playback” on page 39.
The track being played is confirmed to be partially erased. The passage between the point that is 5 seconds before the beginning point of the partial erase and the beginning point (the timing you press MENU) is repeatedly played.
The following message appears on the display.
Beginning point of the partial erase
0 0 5 S t 0 1 0 0 0
TIME
Playing time of the track
2. Set the beginning point of the partial erase by rotating the MULTI JOG knob (pressing +/– on the remote control).
The beginning point of the partial erase can be set by “minute: second: frame”. The unit to be set is flashing. Move the flash to the unit to be set by pressing t/e or r/y.
If you stop rotating the MULTI JOG knob, this unit searches for the beginning point according to the setting made, and starts repeated playback of the passage between the point that is 5 seconds before the beginning point and the beginning point.
3. Press MULTI JOG knob (ENTER on the remote control) to confirm the beginning point of the partial erase.
The passage between the temporary ending point of the partial erase (the point that is 10 seconds after the beginning point) and the point that is 5 seconds after the temporary ending point is repeatedly played.
The following message appears on the display.
Ending point of the partial erase
|
|
|
|
|
|
|
|
|
|
|
|
| 0 2 0 |
| E d |
| 0 2 0 0 0 |
| TIME | ||
|
|
|
|
| ||||||
|
| |||||||||
G |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Playing time of the track
Press CLEAR to cancel the confirmed selection.
4. Set the ending point of the partial erase by rotating the MULTI JOG knob (pressing +/– on the remote control).
The ending point of the partial erase can be set by “minute: second: frame”. The unit to be set is flashing. Move the flash to the unit to be set by pressing t /e or r/y.
If you stop rotating the MULTI JOG knob, this unit searches for the ending point according to the setting made, and starts repeated playback of the passage between the ending point and the point that is 5 seconds after the ending point.
5. Press MULTI JOG knob (ENTER on the remote control) to confirm the ending point of the partial erase.
The passage between the point that is 5 seconds before the beginning point and the point that is 5 seconds after the ending point of the partial erase is repeatedly played.
The following message appears on the display.
P r t . E r . | 0 0 5 |
| L |
G | dB |
R | |
|
|
| P t . F i x | 0 0 6 | |
|
|
| L |
| G | dB | |
| R | ||
|
|
| |
|
|
|
|
Caution |
|
| |
•During the playback of the passage mentioned above, the sound may missing at the joint between the passage before the beginning point and the passage after the ending point. However, the partially erased track is played properly after the partial erase has been completed.
To change the ending point, press CLEAR once to return to step 4.
To change the beginning point, press CLEAR twice to return to step 2.
6. Press COMPLETE.
The selected part is erased.
Playback resumes from the beginning of the partially erased track.
Caution
•The minimum length of a track is 4 seconds. It is not possible to create a track that is shorter than 4 seconds by a partial erase.
Track | 1 | 2 |
Track
3
: Part to be erased
1Repeated passage when setting the beginning point
2 Repeated passage when setting the ending point
3 Repeated passage after confirming the ending point
