Yamaha CDR-HD1300E owner manual Add Fade Out, O u t 0 0 1 1 ?, U t 3 1 0 0

3. Press COMPLETE.

The fade-in is added to the beginning of the track being played for the selected length.

Playback resumes from the beginning of the track the fade-in has been added to.

Notes

•Fade-in cannot be added to a track that is shorter than 21 seconds.

•The fade-in effect becomes ineffective if the following editing is performed to the track which the fade-in is added to.

–Erasing a certain part of the track (Part Erase).

–Combining the track (Track Combine).

–Dividing the track (Track Divide).

–Adjusting the beginning of the track (Track Adjust).

•If “Track Adjust” has been performed, the fade-in effect of both the adjusted track and the previous track becomes ineffective.

Add Fade Out

You can add fade-out at the end of a track. The end of the track is played with gradually lowering the level when fade-out has been added.

■Editing during the stop mode

1. Select and confirm “Add Fade Out” in step 5 of “Editing during the stop mode” on page 39.

The following message appears on the display.

Disc that contains the track to add fade-out

F d . O u t 0 0 1 1 ?

L	2	GROUP
dB –30 –10 –6 –		0
R

Track to add fade-out

The disc number that contains the track to add fade-out flashes.

2. Select the disc that contains the track to add fade-out by rotating the MULTI JOG knob (pressing +/– on the remote control).

3. Press the MULTI JOG knob (ENTER on the remote control) to confirm the disc that contains the track to add fade-out.

The number of the track to add fade-out flashes.

Press CLEAR to cancel the confirmed selection.

TRACK EDITING

4. Select the track to add fade-out by rotating the MULTI JOG knob (pressing +/– on the remote control).

5. Press the MULTI JOG knob (ENTER on the remote control) to confirm the track to add fade-out.

The ending of the track for 8 seconds is repeatedly played with a 3-second (initial setting) fade-out.

The following message appears on the display.

Fade-out length

F . O u t : 3 1 0 0 1

L
dB –30 –10 –6 –2	0	TIME
R

Playing time of the track

6. Rotate MULTI JOG knob (+/– on the remote control) to set the fade-out length.

The fade-out length can be set in the 1 to 10 second range by 1- second steps.

If you stop rotating the MULTI JOG knob, this unit starts repeated playback of the ending of the track with a fade-out of the length set in above step, with extra portion for further 5 seconds.

Press CLEAR to cancel the setting.

7. Press COMPLETE.

The fade-out is added to the end of the selected track for the selected length.

This unit returns to the editing menu item selection.

Continues to next page

EDITING

E-49

English