Yamaha PSR-OR700 Registering and Saving Custom Panel Setups, Registering Custom Panel Setups, Registering and Recalling Custom Panel Setups — Registration Memory

Registering and Recalling Custom Panel Setups — Registration Memory

The Registration Memory function allows you to save (or “register”) virtually all panel settings to a Registration Memory button, and then instantly recall your custom panel settings by pressing a single button. The registered settings for eight Registration Memory buttons should be saved as a single Bank (file).

Registering and Saving Custom Panel Setups

Registering Custom Panel Setups

1 Set up the panel controls (such as Voice, Style, effects, and so on) as desired.

Refer to the Data List for a list of parameters that can be registered with the Registration Memory function. The Data List is available at the Yamaha website. (See page 5.)

2 Press the REGISTRATION MEMORY [MEMORY] button. The display for selecting the items to be registered appears.

Only the items selected here will be registered.

2 5

3 4

3 Press the [2π†]–[7π†] buttons to select items. To cancel the operation, press the [I] (CANCEL) button.

4 Enter or remove the checkmark in the box of the item to determine whether the item should be registered or not, by pressing the [8π†] button.

5 Press one of the REGISTRATION MEMORY [1]–[8] buttons to register your settings.

It is recommended that you select a button whose lamp is not lit in red or green. Buttons that are lit in red or green, already contain the panel setup data. Any panel setup previously registered to the selected REGISTRATION MEMORY button (lamp lights in green or red) will be erased and replaced by the new settings.

6 Register various panel setups to other buttons by repeating steps 1–5.

When recalling registration set- ups, you can also select the items to be recalled or not, even if you selected all items when registering (page 134).

About the lamp status:

Off..............	no data registered
On (green)...	data registered, but
	not currently selected
On (red)......	data registered, and
	currently selected

Deleting an unneeded panel setup

See page 133.

Deleting all eight current panel setups

To delete all the eight current panel setups, turn the [POWER] button ON while holding the B5 key (right-most B key on the key- board).

Setups Panel Custom Recalling and Registering

PSR-OR700 Owner’s Manual 131