Yamaha PSR-OR700 •FREQ (center frequency), ■Editing and Saving the selected EQ, •Bandwidth (also called “Shape” or “Q”), 6 Use the [A]/[B] buttons to select a preset EQ type

Editing the Volume and Tonal Balance (MIXING CONSOLE)

If you want to edit the EQ parameters, go on to the next operation.

■Editing and Saving the selected EQ5 Press the [F] (EDIT) button to call up the MASTER EQ EDIT display.6 Use the [A]/[B] buttons to select a preset EQ type.

6

9

8 7

7 Use the [3π†]–[7π†] buttons to boost or cut each of the five bands.

Use the [8π†] button to boost or cut all the five bands at the same time.

8 Adjust the Q (bandwidth) and the FREQ (center frequency) of the band selected in step 7.

•Bandwidth (also called “Shape” or “Q”)

Use the [1π†]button. The higher the value of Q, the narrower the band width.

•FREQ (center frequency)

Use the [2π†]button. The available FREQ range is different for each band.

9 Press the [H] or [I] (STORE 1 or 2) button to save the edited EQ type (page 67).

Up to two types of EQ can be created and saved. When recalling the saved

EQ type, use the same procedure as in step 6.

Voices Editing and Creating Using,

PSR-OR700 Owner’s Manual 91