Yamaha PSR-OR700 Effect Type, ■Selecting an Effect type, 5 Use the [1π†]/[2π†] buttons to select the effect BLOCK, 7 Use the [5π†]/[6π†] buttons to select the effect CATEGORY

Using, Creating and Editing Voices

Editing the Volume and Tonal Balance (MIXING CONSOLE)

Effect Type

■Selecting an Effect type

1–3Same operation as in the “Basic Procedure” on page 84. In step 2, select the EFFECT tab.

4 Press the [F] (TYPE) button to call up the Effect Type selection display.5 Use the [1π†]/[2π†] buttons to select the effect BLOCK.

DSP:

Stands for Digital Signal Processor (or Processing). DSP changes and enhances the audio signal in the digital realm to produce a wide range of effects.

	5	6	7	8
Effect Block	Effect-applicable parts		Effect characteristics
REVERB	All parts		Reproduces the warm ambience of playing
			in a concert hall or jazz club.
CHORUS	All parts		Produces a rich “fat” sound as if several
			parts are being played simultaneously.
DSP1	STYLE PART		In addition to the Reverb and Chorus types,
	SONG CHANNNEL 1–16		the instrument has special DSP effects, that
			include additional effects usually used for a
			specific part, such as distortion and tremolo.
DSP2	RIGHT 1, RIGHT 2, LEFT,		Any unused DSP blocks are automatically
DSP3	SONG CHANNEL 1-16		assigned to the appropriate parts (channels)
DSP4			as needed.

6 Use the [3π†]/[4π†] buttons to select the part to which you want to apply the effect.

7 Use the [5π†]/[6π†] buttons to select the effect CATEGORY.

88 PSR-OR700 Owner’s Manual