Adjusting the Volume Balance and Voice Combination, etc. (MIXING CONSOLE)

Using, Creating and Editing Songs

About the [SONG CH 1–8]/ [SONG CH 9–16] displays

A Song consists of 16 separate channels. Separate settings can be made for each of the 16 channels in the MIXING CONSOLE display. Adjust the parameters in the SONG CH 1-8 or SONG CH 9-16 display respectively. Usu- ally, CH 1 is assigned to the [TR 1] button, CH 2 is assigned to the [TR 2] button, and CH 3-16 are assigned to the [EXTRA TR] button, respectively.

Press the [C]/[H] (VOICE) buttons in step 5 to select the Voice which you want to change. Then, press one of the [1π†] to [8π†] buttons to call up the Voice selection display for the channel.

Reading Song data automatically when inserting a USB storage device

You can have the instrument automatically call up the first Song (not contained in a folder) on a USB storage device, as soon as the device is connected to the [USB TO DEVICE] terminal.

1Call up the operation display.

[FUNCTION] → [J] UTILITY → TAB [√][®] MEDIA

2Press the [3π]/[4π] (SONG AUTO OPEN) button to select “ON.”

Adjusting the Volume Balance and Voice Combination, etc. (MIXING CONSOLE)

You can set the mixing-related parameters of a Song. Refer to the section “Adjust- able items (parameters) in the MIXING CONSOLE display” on page 85. Call up the “SONG CH 1–8” or “SONG CH 9–16” display in step 3 of the Basic Procedure in “Editing the Volume Balance and Voice Combination (MIXING CONSOLE)” on page 84. Below are two operation examples.

Adjusting the Volume Balance of Each Channel

1 Select a Song (page 36).

2 Press the [MIXING CONSOLE] button to call up the MIXING CON-

SOLE display.

3 Select the [VOL/VOICE] tab by pressing the TAB [√][®] buttons.

4 Press the [MIXING CONSOLE] button repeatedly to call up the display of “SONG CH 1–8” or “SONG CH 9–16.”

5 Press the [J] button to select the “VOLUME.”6 Adjust the volume balance of each channel by using the [1π†]– [8π†] buttons.

7 You can save the volume settings to the Song in the Setup operation of the SETUP (page 162).

Make sure to checkmark the “VOLUME” item in step 2 of the Setup proce- dure.

140 PSR-OR700 Owner’s Manual