Yamaha PSR-OR700 Restoring the Factory-programmedSettings, Restoring the Factory-programmedSystem, Restoring the Factory-programmedSettings Independently by Item

Restoring the Factory-programmed Settings

Basic Operation

CAUTION

This operation deletes all your original data for the respective item (MIDI SETUP, USER EFFECT, MUSIC FINDER, and FILES&FOLDERS).

4 Press the [8π] (OK) button to actually enter the new name and return to the previous display.

•Deleting characters

Move the cursor to the character you wish to delete by using the DATA ENTRY dial, and press the [7†] (DELETE) button. To delete all charac- ters on the line at once, press and hold the [7†] (DELETE) button.

•Entering marks

1After actually entering a character by moving the cursor, press the [6†] button to call up the mark list.

2Use the DATA ENTRY dial to move the cursor to the desired mark, then press the [8π] (OK) button.

•Entering numbers

First, select one of the following: “ABC” “CASE” (half-size capital alpha- bet) and “case” (half-size lowercase alphabet). Then, press and hold down the appropriate button, [2π†]–[5π†], [6π] and [7π] but- ton, for a while, or press it repeatedly until the desired number is selected.

•Inserting a Character

1Move the cursor to the desired position.

Use the same operation as in “Deleting Characters” above.

2Press the [2π†]–[6π†], or [7π] buttons to enter numbers and symbols.

3Press the [8π] (OK) button to enter characters.

•Entering a Space

1Move the cursor to the desired position.

Use the same operation as in “Deleting Characters” above.

2Press [6†] button to call up the mark list.

3Make sure the cursor is at the beginning space (blank) of the mark list, and press the [8π] (OK) button.

Restoring the Factory-programmed Settings

Restoring the Factory-programmed System

While holding the C6 key (right-most key on the keyboard), turn the [POWER] button ON.

This operation has the same result as and is a shortcut for the System Setup restore operation explained in step 2 of the following section.

Restoring the Factory-programmed Settings Independently by Item

1 Call up the operation display.

[FUNCTION] → [J] UTILITY → TAB [√][®] SYSTEM RESET

72 PSR-OR700 Owner’s Manual