Yamaha PSR-OR700 ■Editing and Saving the effect, 8 Use the [7π†]/[8π†] buttons to select the effect TYPE, 10 If you have selected one of the DSP 2-4effect blocks in step 5:

Editing the Volume and Tonal Balance (MIXING CONSOLE)

8 Use the [7π†]/[8π†] buttons to select the effect TYPE.

If you want to edit the effect parameters, go on to the next operation.

■Editing and Saving the effect

9 Press the [F] (PARAMETER) button to call up the display for editing the effect parameters.

10 If you have selected one of the DSP 2-4 effect blocks in step 5:

You can edit its standard parameters as well as its variation parameter.

To select the standard type of parameters, press the [B] button. To select its variation parameter, press the [E] button.

Re-selecting the Effect block, category and type

Editing and Creating Using,

10

10

13

Use the [1π†]–[3π†] but- tons. The re-selected effect con- figuration is displayed at the upper left side box in the display.

Voices

11 12

11 Select one of the parameters you want to edit by using the [4π†]/ [5π†] buttons.

Available parameters differ depending on the selected Effect type.

12 Adjust the value for the selected parameter by using the [6π†]/ [7π†] buttons.

If you have selected the REVERB, CHORUS or DSP1 effect block in step 5:

Adjust the Effect Return Level by pressing [8π†] button.

13 Press the [I] (SAVE) button to call up the display for saving your original effect.

Effect Return Level:

Determines the level or amount of effect applied.

This is set for all parts or channels.

PSR-OR700 Owner’s Manual 89