Recalling the Registered Panel Setups

Registering and Recalling Custom Panel Setups

CAUTION

Settings in the REGISTRATION FREEZE display are automatically saved to the instrument when you exit from this dis- play. However, if you turn the power off without exiting from this display, the settings will be lost.

Disabling Recall of Specific Items (Freeze Function)

Registration Memory lets you recall all the panel setups you made with a single button press. However, there may be times that you want certain items to remain the same, even when switching Registration Memory setups. For example, you may want to switch Voices or effect settings while keeping the same accompaniment Style. This is where the Freeze function comes in handy. It lets you maintain the settings of certain items and leave them unchanged, even when selecting other Registration Memory buttons.

1 Call up the operation display.

[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET → TAB [√][®] FREEZE

2 Press the [2π†]–[7π†] buttons to select items.

3 Enter checkmarks for the items to be “Frozen” (i.e., to remain unchanged), by pressing the [8π†] button.

4 Press the [EXIT] button to exit from the operation display.5 Press the [FREEZE] button on the panel to turn the Freeze function on.Calling Up Registration Memory Numbers in Order — Registration Sequence

As convenient as the Registration Memory buttons are, there may be times during a performance when you want to quickly switch between settings — without having to take your hands from the keyboard. The convenient Registration Sequence function lets you call up the eight setups in any order you specify, by simply using the TAB [√][®] buttons or the pedal as you play.

1 Select the desired Registration Memory bank to program a sequence (page 132).

2 Call up the operation display.

[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET → TAB [√][®] REGISTRATION SEQUENCE

3 If you intend to use a pedal to switch Registration Memory settings, specify here how the pedal will be used — to advance or to reverse through the sequence.

Use the [C] button to select the pedal for advancing through the sequence. Use the [D] button to select the pedal for reversing through the sequence.

134 PSR-OR700 Owner’s Manual