Turn the [Harmony/Echo] button on.
Call up the operation display. [FUNCTION] → [H] HARMONY/ECHO
Use the [1π†]–[3π†] buttons to select the Harmony/Echo type.

Selecting the Harmony/Echo type

Selecting the Harmony/Echo type

You can select the desired Harmony/Echo effect from a variety of types.

1

2

3

4 Use the [4π†]–[8π†] buttons to select various Harmony/Echo settings (page 83).

The available settings differ depending on the Harmony/Echo type.

Harmony/Echo Types

The Harmony/Echo types are divided into the following groups, depending on the particular effect applied.

Using, Creating and Editing Voices

Harmony Types

These types apply the harmony effect to notes played in the right-hand section of the keyboard according to the chord specified in the left-hand section of the keyboard. (Note that the “1+5” and “Octave” settings are not affected by the chord.)

Multi Assign Type

This type applies a special effect to chords played in the right- hand section of the keyboard.

Echo Types

These types apply echo effects to notes played in the right-hand section of the keyboard in time with the currently set tempo.

Canceling the chord sound for the harmony effect This cancels the sound of the chord played in the chord range of the keyboard — letting you hear only the Harmony effect. Set [ACMP] to On, set [SYNC START] to Off, and select “Off” for the Stop Accompaniment parameter.

●Harmony Types

When one of the Harmony Types is selected, the Harmony effect is applied to notes played in the right-hand section of the keyboard according to the type

82

PSR-OR700 Owner’s Manual