Yamaha PSR-OR700 Deleting an Unneeded Panel Setup/Naming a Panel Setup, [A]–[J], Parameter Lock, Press one of the, Selection display, 4 Edit the panel setups

Press the REGIST BANK [+] and [–] buttons simultaneously to call up the REGISTRATION BANK Selection Display.

Press one of the [A]–[J] buttons to select a bank to be edited.

Recalling the Registered Panel Setups

Parameter Lock

You can “lock” specific parameters (e.g., effect, split point, etc.) to make them selectable only via the panel control — in other words, instead of via Registration Memory, One Touch Setting, Music Finder, Song or incoming MIDI data, etc.

1Call up the Parameter Lock display.

[FUNCTION] → [J] UTILITY → TAB [√][®] → CONFIG 1 → [B] 3 PARAM-

ETER LOCK

2Select the desired parameter by using the [1π†]–[7π†]buttons, then lock it with the [8π] (OK) button.

Deleting an Unneeded Panel Setup/Naming a Panel Setup

The panel setups can be deleted or named individually as desired.

1

2

3 Press the [8†] (EDIT) button to call up the REGISTRATION EDIT Dis- play.4 Edit the panel setups.•Deleting a panel setup

Press the [5†] button to delete a panel setup (page 69).

•Renaming a panel setup

Press the [1†] button to rename a panel setup (page 70).

The number above the

file name corresponds to the REGISTRATION MEMORY [1]–[8] but- tons.

5 Press the [8π] (UP) button to return to the REGISTRATION BANKSelection display.

Setups Panel Custom Recalling and Registering

PSR-OR700 Owner’s Manual 133