Yamaha PSR-OR700 length, ] button, half-note, Press the [5, ] button to select the, 1 Press the [G] button to select “.”, Press the [H] button to select “Tenuto.”

Before you go on to step 6, release the F3 key and the [7π†] button.

While holding F3 on the keyboard, press the [7π†] button.

Press the [5π†] button to select the half-note length.

Press the [H] button to select “Tenuto.”

2

3 Press the [I] button to select “normal” note type.

4

5

4

Recording Your Performance to MIDI

Since the music score displayed on the instrument is generated from the recorded MIDI data, it may not appear exactly the same as shown here.

About the items which can be selected via the [G] [H] [I] buttons

See page 151.

Using, Creating and Editing Songs

Example 2

The explanations here apply to step 7 of the “Basic Operations for Step Recording” on page 148.

2–5 6–8 10–13 14–16

19

*The numbers shown in the sheet correspond to the following operation step numbers.

In this example, keep in mind that one of the steps involves holding down a key on the keyboard while executing the operation.

Select the Voice for recording after calling up the Step Record display.

1 Press the [G] button to select “.”

1

2 3

152 PSR-OR700 Owner’s Manual