Yamaha RX-V663 97 En, OFF, English, ADVANCED, OPERATION, –“MEMORY GUARD”, When composite video or, ■Video settings B)VIDEO SET, Video conversion VIDEO CONV

■Video settings B)VIDEO SET

Note

Use “VIDEO” of “INIT” in “ADVANCED SETUP” to set the parameters in “VIDEO SET” to the factory presets (see page 109).

B)VIDEO SET

. VIDEO CONV.;;;;;;ON

[]/[p]: Up/Down

[p]/[[]: Select

Video conversion VIDEO CONV.

Use this feature to set whether to convert the video signals input at the VIDEO, S VIDEO, and COMPONENT VIDEO jacks.

Choice	Functions

ON	Converts composite, S-video, and component
	video signals interchangeably and up-converts
	composite, S-video, and component video
	signals to HDMI video signals.

OFF	Does not convert any signals.

Notes

•This unit does not convert 480 line video signals and 576 line video signals interchangeably.

•The analog component video signals with 480i (NTSC)/576i (PAL) of resolution are converted into the S-video or composite video signals and output at the S VIDEO MONITOR OUT and VIDEO MONITOR OUT jacks.

•The converted video signals are only output at the MONITOR OUT jacks. When recording a video source, you must make the same type of video connections between each component.

•When composite video or S-video signals from a VCR are converted into component video signals, the picture quality may suffer depending on your VCR.

•Unconventional signals input at the composite video or S-video jacks cannot be converted or may be output abnormally. In such

cases, set “VIDEO CONV.” to “OFF”.

Customizing this unit (MANUAL SETUP)

■Memory guard C)MEMORY GUARD

Use this feature to prevent accidental changes to sound field program parameter and other system settings.

C)MEMORY GUARD

>OFF ON

[p]/[[]: Select

[ENTER]: Return

ChoiceFunctions

OFF	Turns off the “MEMORY GUARD” feature.

ONProtects:

–sound field program parameters

–“AUTO SETUP” items

–all speaker levels

–“MANUAL SETUP” items

Notes

•You can change the following parameters even if “MEMORY GUARD” is set to “ON”:–“EXTD SUR.” in “SOUND MENU” (see page 92)–“DECODER MODE” in “INPUT MENU” (see page 94)–“PARENTAL LOCK” in “INPUT MENU” (see page 94)–“MEMORY GUARD”

•When “MEMORY GUARD” is set to “ON”, “ ” appears at the top right of the “SET MENU” screen.

•You can change the settings of “SUR.” in the sound field program parameter screen (see page 77) even if “MEMORY GUARD” is set to “ON”.

OPERATION	ADVANCED

English