Yamaha RX-V663 107 En, ID1, AMP, ID1, AMP, AMP, AMP, AMP, AMP, English, more than 3 seconds, more than 3 seconds, While pressing and holding, code number “5007” or “5016”

See page 106 for the operation of the advanced setup.

■Remote control AMP ID REMOTE AMP

Use this feature to set the AMP ID of this unit for remote control recognition. This feature is useful when you operate this unit and the other Yamaha receivers/ amplifiers in the same room separately.

Choices: ID1, ID2

• Select “ID1” when the remote control AMP ID code is set to “5019”.

• Select “ID2” when the remote control AMP ID code is set to “5020”.

Setting remote control AMP ID codes

You need to set the remote control AMP ID code for the remote control.

1While pressing and holding 5AMP on the remote control, press 2AV POWER for

more than 3 seconds.

5AMP flashes twice.

AMP	POWER
	AV
While holding	Press for 3
down	seconds

Advanced setup

■Remote control TUNER ID REMOTE TU

Use this feature to set the TUNER ID of this unit for remote control recognition.

Choices: ID1, ID2

• Select “ID1” when the remote control TUNER ID code is set to “5007”.

• Select “ID2” when the remote control TUNER ID code is set to “5016”.

Setting remote control TUNER ID codes

You need to set the remote control TUNER ID library code for the remote control.

1While pressing and holding 4TUNER on the remote control, press 2AV POWER for

more than 3 seconds.

5AMP flashes twice.

TUNER	POWER
	AV
While holding	Press for 3
down	seconds

AMP

flashes

AMP	2 Press the numeric buttons (G) to enter the
	code number “5007” or “5016”.
flashes	When the setting succeeds, 5AMP flashes twice;
	however, when it does not, 5AMP flashes

2Press the numeric buttons (G) to enter thecode number “5019” or “5020”.

When the setting succeeds, 5AMP flashes twice; however, when it does not, 5AMP flashes

repeatedly.

AMP ID		Remote
	Function	control AMP
code *1
		ID *2
5019	To operate this unit using	ID1
(initial setting)	the default code.	(initial setting)
5020	To operate this unit using	ID2
	an alternative code.

*1 The remote control setting

*2 The setting of this unit

repeatedly.

TUNER ID		Remote
	Function	control
code *1
		TUNER ID *2
5007	To operate this unit using	ID1
(initial setting)	the default code.	(initial setting)
5016	To operate this unit using	ID2
	an alternative code.

*1 The remote control setting

*2 The setting of this unit

English

107 En