SIRIUS Satellite Radio™ tuning
4Press 8k/ nrepeatedly to select “SIRIUS” and then press 8ENTER.The following menu screen appears.A)SIRIUS
.INPUTRENAME
VOL. TRIM;;;;;0.0dB
PARENTAL LOCK
[[]/[p]:Up/Down [ENTER]:Enter
5Press 8nrepeatedly to select “PARENTALLOCK” and then press 8ENTER.“NEW PIN:0000” appears.PARENTAL LOCK
NEWPIN:0000-
[0][9]:NUMBER
[ENT]:Enter
Note
If a SiriusConnect tuner is not connected to this unit, “Not Available” appears.
y
If the Parental Lock code number is already set, “PIN:___” appears instead of “NEW PIN:0000”. Refer to step 8 and then proceed the operations.
6Enter the desiredy
Press 9RETURN to return the previous menu level without setting the code number.
7Press 8ENTER to confirm the code number.“OK” and then the SIRIUS Satellite Radio channel list appears. Refer to the step 9 and then proceed the operations.
8Enter theWhen the code number is correct, “OK” and then the SIRIUS Satellite Radio channel list appears.
9Press 8l/ hrepeatedly to select thedesired channel category and then press8k/ nrepeatedly to select the channel youwant to lock.Note
In the SIRIUS Satellite Radio channel list screen, this unit outputs the sound of the selected channel even if the channel is locked. Only the first eight characters of each channel name are displayed in the list.
10Press 8ENTER to lock the selected channel.Check mark appears before the locked channel.y
When you select the locked channel and press 8ENTER, this unit unlocks the selected channel.
11Repeat steps 9 and 10 to lock the channels you want.12Press 9RETURN to exit from the “PARENTAL LOCK” screen.13Press MMENU to exit from the setup menu.This unit is tuned into the last channel you select in the “PARENTAL LOCK” screen. If the channel is locked, this unit is tuned into “184 SIRIUS Weather & Emergency” or “000 Sirius IDxxxxxxxxxxxx” (“xxxxxxxxxxxx” indicates the Sirius ID of your SiriusConnect tuner).
y
•If you forget or want to change the Parental lock code number, use “SR PIN” in “ADVANCED SETUP” to reset the Parental Lock code number.
•When you select “ALL” in “INIT” (see page 109), all locked channels are unlocked.
■Tuning into the locked channelsYou can tune into the locked channels by the Direct number access mode or preset tuning mode. When you tune into the locked channel, following message appears in the front panel display. Enter the code number you set
for the Parental Lock feature by using the numeric buttons (G) or press TENT to cancel the tuning.
PIN:____
Notes
•If the entered code number is incorrect, “Wrong” appears in the front panel display and this unit is tuned into the previously selected channel.
•If a channel is unlocked, you can also select the channel in Zone2.