Start pairing START PAIRING

Use this feature to start pairing the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with your Bluetooth component. For details about the pairing, refer to “Pairing the Bluetooth™ adapter and your Bluetooth™ component” on page 70.

To ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting.

1Press 8ENTER to start pairing.

The connected Bluetooth adapter starts searching Bluetooth components. “Searching...” appears in the video monitor.

2Check that the Bluetooth component detects the Bluetooth adapter.

If the Bluetooth component the Bluetooth adapter, “YBA-10 YAMAHA” (example) appears in the Bluetooth device list.

3Select the Bluetooth adapter in the Bluetooth device list and then enter the pass key “0000” on the Bluetooth component.

Once this unit completes the pairing successfully, “Pairing completed” appears.

y

To cancel the pairing, press 9RETURN to exit from “START PAIRING”.

4Press 9RETURN to exit from “START PAIRING”.

Notes

If the connected Bluetooth adapter cannot find any Bluetooth components, “Not found” appears.

If a Bluetooth adapter is not connected to this unit, “No Bluetooth Adapter” appears.

Multi-channel input BGV BGV

Use this feature to select the video source played in the background of the sources input at the MULTI CH INPUT jacks.

M) MULTI CH

INPUT RENAME

VOL. TRIM;;;;;0.0dB

. BGV;;;;;;;;;;;;LAST INPUT CH;;;;;;;;6CH

[]/[p]: Up/Down

[ENTER]: Select

 

Customizing this unit (MANUAL SETUP)

 

 

Choice

Functions

 

 

LAST

Automatically selects the last selected video

 

source as the background video source.

 

 

DVD, DTV/

Selects the corresponding input source as the

CBL, DVR,

background video source.

VCR, V-AUX

 

 

 

OFF

Does not play the video source in the

 

background.

 

 

Input channels INPUT CH

Use this setting to select the number of channels input from an external decoder (see page 25).

Choices: 6CH, 8CH

M) MULTI CH

INPUT RENAME

VOL. TRIM;;;;;0.0dB BGV;;;;;;;;;;;;LAST

. INPUT CH;;;;;;;;6CH

[]/[p]: Up/Down

[ENTER]: Select

If the connected component outputs discrete 6-channel audio signals.Select “6CH”.If the connected component outputs discrete 8-channel audio signals.

Select “8CH”. Also set “FRONT” (see below) to the analog audio jacks at which the front left and right channel signals output from the connected component are input.

Front left and right channels input jack FRONT

If you selected “8CH” in “INPUT CH”, you can select the analog audio jacks at which the front left and right channel signals output from the connected external decoder is input.

Choices: CD, MD/CD-R, DVD, DTV/CBL, DVR, VCR, V-AUX

M) MULTI CH

INPUT RENAME

VOL. TRIM;;;;;0.0dB

BGV;;;;;;;;;;;;LAST

INPUT CH;;;;;;;;8CH

. FRONT;;;;;;;;;;;DVD

[]/[p]: Up/Down

[ENTER]: Select

Note

“FRONT” parameter appears only when you set “INPUT CH” to “8CH”.

OPERATION

ADVANCED

 

 

English

95 En