2 VOLUME MENU
. ADAPTIVE DRC;;;;OFF ADAPTIVE DSP
LEVEL;;;;OFF
MUTE TYPE;;;;FULL MAX VOL.;;;;+16.5dB INIT. VOL.;;;;;;OFF
[]/[p]: Up/Down
[p]/[[]: Select
Adaptive dynamic range controlADAPTIVE DRCUse this feature to adjust the dynamic range in conjunction with the volume level. This feature is useful when you are listening at lower volumes or at night. When “ADAPTIVE DRC” is set to “AUTO”, this unit controls the dynamic range as follows:
–If the VOLUME setting is low: the dynamic range is narrow–If the VOLUME setting is high: the dynamic range is widelevel |
| AUTO |
| level |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
| AUTO |
| |||
Output |
|
|
| Output |
|
|
| ||
| OFF |
|
|
| OFF |
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Input level |
|
|
|
| Input level | ||
|
| VOLUME: low |
|
|
| VOLUME: high | |||
|
|
|
|
|
|
|
|
| |
Choice |
| Functions | |||||||
|
|
|
|
|
|
|
|
| |
AUTO |
| Adjusts the dynamic range automatically. | |||||||
|
|
|
|
|
|
|
|
| |
OFF |
| Does not adjust the dynamic range automatically. | |||||||
|
|
|
|
|
|
|
|
|
|
y
•You can also adjust the dynamic range of the bitstream signal sources by using “DYNAMIC RANGE” in “SOUND MENU” (see page 91).
•This function is also useful for listening with your headphones.Note
The adaptive dynamic range control feature does not function when this unit is in the Pure Direct mode (see page 52).
Customizing this unit (MANUAL SETUP)
Adaptive DSP level ADAPTIVE DSP LEVELUse this feature to make fine adjustments of the DSP effect level (see page 73) automatically in conjunction with the volume level.
Choice | Functions |
|
|
AUTO | Adjusts the DSP effect level in conjunction with |
| the volume level. |
|
|
OFF | Does not adjust the DSP effect level |
| automatically. |
|
|
Note
Even if you set “ADAPTIVE DSP LEVEL” to “AUTO”, this unit does not change but the
Use this feature to adjust how much the mute function reduces the output volume (see page 45).
Choice | Functions |
|
|
FULL | Mutes all the audio output. |
|
|
Reduces the current volume by 20 dB. | |
|
|
Use this feature to set the maximum volume level in the main zone. This feature is useful to avoid the unexpected loud sound by mistake. For example, the original volume range is
Notes
•When this unit is in the auto setup procedure, the volume level is automatically set to 0 dB regardless of the current “MAX VOL.” setting.
•The “MAX VOL.” setting takes priority over the initial volume setting. For example, if “INI.VOL.” is set to
Use this feature to set the volume level of the main zone when the power of this unit is turned on.
Choices: OFF, MUTE,Note
The “MAX VOL.” setting takes priority over the initial volume setting.OPERATION | ADVANCED |
|
|
English