SIRIUS Satellite Radio™ tuning

 

 

y

Before performing the following operations, press KSIRIUS

 

You can select the preset station group (A to E) by pressing

on the remote control.

 

DA/B/C/D/E (or 8A-E/CAT. l/ h) repeatedly.

 

 

 

 

 

 

Setting the SIRIUS Satellite Radio™ preset channels

You can use this feature to store up to 40 SIRIUS Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 64.

1Search for a channel you want to set as a preset channel by using one of the SIRIUS Satellite Radio search modes.

See “Basic SIRIUS Satellite Radio™ operations” on page 63 for details.

4Press FMEMORY (or 9MEMORY) to set the selected SIRIUS Satellite Radio channel as a preset channel while the MEMORY indicator is flashing.

A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.

A1:023 Hair Na

Colon (:)

Note

Once you set a new preset channel, the one previously stored in the same preset channel group and number is cleared.

001 SIRIUS Hit

Currently selected channel number

2Press FMEMORY (or 9MEMORY).

The MEMORY indicator flashes in the front panel display for approximately 30 seconds.

MEMORY

Flashes

Note

You must proceed to and carry out steps 3 through 4 while the MEMORY indicator is flashing in the front panel display.

3Press EPRESET/TUNING/CH l/ h

(or 8PRESET/CH k/ n) repeatedly to select a preset channel group and number (A1 to E8) while the MEMORY indicator is flashing.

The preset channel number appears in the front panel display.

Flashes

MEMORY

A1023 Hair Na

Currently selected preset channel group and number

Setting the Parental Lock

You can use the Parental Lock feature to limit the access to the desired SIRIUS Satellite channels. This unit automatically skips the locked channels when this unit is in the All Channel Search mode or Category Search mode

and you search a channel by pressing EPRESET/ TUNING/CH l/ h(or 8PRESET/CH k/ n).

Setting the code number and the lockedchannels

Use this feature to set the Parental Lock code number (PIN) and select the channels to be locked.

1Press 5AMP on the remote control and then press MMENU to display.2Press 8nto select “MANUAL SETUP” and then press 8ENTER.3Press 8nrepeatedly to select “INPUTMENU” and then press 8ENTER.

English

65 En