Using the sleep timer

Use this feature to automatically set the main zone to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLET(S) (see page 28).

Note

Even if this unit is in the standby mode, this unit does not cut off the power to AC OUTLET(S) while charging connected iPod (see page 28).

Press 5AMP and then press TSLEEP repeatedly to set the amount of time.Each time you press TSLEEP, the front panel display changes as shown below.

SLEEP 120min

SLEEP 90min

SLEEP OFF SLEEP 30min

SLEEP 60min

The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.

Flashes

SLEEP

SLEEP 120min.

Lights up

SLEEP

Straight

Playback

■Canceling the sleep timer

Press TSLEEP on the remote control repeatedly until “SLEEP OFF” appears in the front panel display.

Disappears

SLEEP OFF

The SLEEP indicator turns off, and “SLEEP OFF” disappears from the front panel display after a few seconds.

y

The sleep timer setting can also be canceled by pressing

ISTANDBY (or KMAIN ZONE ON/OFF) to set the main

zone to the standby mode.

OPERATION

BASIC

 

 

English

47 En