Yamaha RX-V663 Resetting the system, 119 En, Press, Press, English, ADDITIONAL, INFORMATION, on this unit, Press and hold, 3Rotate the NPROGRAM selector to select “INIT”

Resetting the system

Use this feature to reset all the parameters of this unit to the initial factory settings.

Notes

•This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup menu parameters will not be initialized.

•The initial factory settings are activated next time you turn on this unit.

y

To cancel the initialization procedure at any time without making any changes, press LSYSTEM OFF on the front panel.

1Press LSYSTEM OFF on the front panel to set this unit to the standby mode.

2Press and hold MTONE CONTROL and then press KMAIN ZONE ON/OFF to turn

on this unit.

This unit turns on, and the advanced setup menu appears in the front panel display.

TONE CONTROL While holding down

MAIN ZONE

ON/OFF

3Rotate the NPROGRAM selector to select “INIT”.4Press MTONE CONTROL repeatedly to select “ALL”.

y

Select “CANCEL” to cancel the initialization procedure without making any changes.

5Press LSYSTEM OFF to confirm your selection and set this unit to the standby mode.

INFORMATION ADDITIONAL

English

119 En