■Zone 2 settings F)ZONE2 SET

F)ZONE2 SET

. MAX VOL.;;;+16.5dB INIT. VOL.;;;;;OFF

[]/[p]: Up/Down

[p]/[[]: Adjust

Zone 2 Maximum volume MAX VOL.Use this feature to set the maximum volume level in the Zone 2.

Control range: –30.0 dB to +15.0 dB, +16.5 dB

Control step: 5.0 dB

Notes

•The “MAX VOL.” setting takes priority over the “INI.VOL.” setting. For example, when “INI.VOL.” is set to –20.0 dB and then “MAX VOL.” is set to –30.0 dB, the volume level is automatically set to –30.0 dB when you turn on the power of this unit next time.

•The “MAX VOL.” setting does not affect the output level at the “ZONE 2 OUT” jacks.

Zone 2 Initial volume INI.VOL.

Use this feature to set the volume level of Zone 2 when the power of this unit is turned on.

Choices: OFF, MUTE, –80.0 dB to +16.5 dB

Control step: 0.5 dB

Notes

•The “MAX VOL.” setting takes priority over the “INI.VOL.” setting.

•When you select “FRONT B”, “PRNS”, “Zone B”, or “NONE” in “EXTRA SP ASSIGN” (see page 85), “Zone 2 SP Not Assigned” appears in the OSD and the “ZONE2 SET” parameter is not available.

•The “INI.VOL.” setting does not affect the output level at the

“ZONE 2 OUT” jacks.

Customizing this unit (MANUAL SETUP)

OPERATION

ADVANCED

 

 

English

99 En