Yamaha RX-V663 33 En, AUTO, Press, FRONT B, NATURAL, English, PREPARATION, PRESENCE, NONE, EXTRA SP ASSIGN, Select “ZONE B”, Select “FRONT B”, Extra speaker assignment

4Press 8l/ hto select the desired setting for “EXTRA SP ASSIGN” and then press 8n.

Extra speaker assignmentEXTRA SP ASSIGNSelects the function of the speakers connected to the EXTRA SP terminals.Choices: FRONT B, ZONE2, ZONE B,PRESENCE, NONE•When you use the alternative front speaker system (see page 43)Select “FRONT B”.•When you use the Zone 2 speakers (see page 104)

Select “ZONE2” to set the function of the speakers to the Zone 2 speakers. This unit drives the Zone 2 speakers by using the internal amplifier.

•When you want to use another front speaker system in Zone BSelect “ZONE B”.•When you use the presence speakers (see page 13)Select “PRESENCE” to set the function of the speakers to the presence speakers.•When you do not use the EXTRA SP terminalsSelect “NONE” to deactivate the EXTRA SP terminals.

Note

If you select “ON” in “BI-AMP” (see page 109), you cannot select “PRESENCE” or “ZONE2” in “EXTRA SP ASSIGN”.

Optimizing the speaker setting for your listening room (YPAO)

Notes

•“RELOAD” or “UNDO” is available only when you have previously run “AUTO SETUP” and confirmed the results.

•“RELOAD” or “UNDO” is not available when you change the setting of “BI-AMP” in the advanced setup (see page 109) or “EXTRA SP ASSIGN” in “BASIC MENU” (see page 85).

6Press 8l/ hto select the desired setting of “EQ”.Parametric equalizer type EQ

Parametric equalizer adjusts the level of the specified frequency bands. This unit automatically selects the crucial frequency bands for the listening room and adjusts the level of the selected frequency bands to create a cohesive sound field in the room. You can select the type of the parametric equalizer adjustment from the following choices.

Choices: NATURAL, FLAT, FRONT

•Select “NATURAL” to average out the frequency response of all speakers with higher frequencies being all speakers to achieve more natural sound. Recommended if the FLAT setting sounds a little harsh.

•Select “FLAT” to average the frequency response of all speakers. Recommended if all of your speakers are of similar quality.

•Select “FRONT” to adjust the frequency response of each speaker in accordance with the sound of your front speakers. Recommended if your front speakers are of much higher quality than your other speakers.

PREPARATION

5Press 8l/ hto select “SETUP” and then press 8n.Choices: AUTO, RELOAD, UNDO, DEFAULT•Select “AUTO” to automatically run the entire “AUTO SETUP” procedure.

•Select “RELOAD” to reload the last “AUTO SETUP” settings and override the previous settings.

•Select “UNDO” to undo the last “AUTO SETUP” settings and restore the previous settings.

•Select “DEFAULT” to reset the “AUTO SETUP” parameters to the initial factory settings.

English